language
.jpg&width=541&height=262)
.jpg&width=283&height=262)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=650&height=399)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
.jpg&width=100&height=100)
Punching machine with a vertical hydraulic cylinder, with power up to 30 tons and able to processing No. 2 tubes at a time and having a maximum section of 60x60 mm or 30x120 mm.
The punching can be blind or passing through two opposite sides of the tubular element, by adjusting the stroke of the piston.
The punching mold can have up to n. 4 + 4 punches, with the same geometry or different between them, assembled together; the mold can be easily replaced in order to work with different tubular sections.
The placement of the tubular in done through a controlled electric axis.
